Description
The Modine POR100 is an advanced oil fired unit heater that is both efficient and reliable. Capable of emitting 100,000 BTU/hr of heat, the POR100 has enough power to warm even very large areas. An efficient PSC fan motor powers the propeller while a two stage fuel unit ensures fuel pressure is always kept high. The unit heater uses advanced microprocessor based burner technology to provide an all-in-one tool for data readings, efficient fuel consumption, and automatic reset control.
Product Information:
- Advanced Flame Retention Burner
- The flame retention burner on the POR100 produces a highly stable flame, giving the burner a 20 to 30 percent increase in combustion efficiency over non-flame retention burners.
- The fuel unit on the POR100 uses two distinct stages to ensure maximum fuel pressure during varying degrees of operation. This allows the unit heater a high degree of functionality even in high lift applications.
- The permanent capacitor split motor design used for the propeller’s motor works together with high grade ball bearings to reduce motor energy consumption and maintenance needs.
- The sensors included in the ignition disable the igniter once a flame has been detected. This feature extends the life of the ignition system, reduces component noise, and reduces gas usage during the ignition process to an absolute minimum.
- The POR100 comes with a Beckett CleanCut pump. The cleaning operation of the burner cuts oil flow almost immediately after power to the motor is cut, resulting is less wasted oil and higher system life.
- Installation by a professional installer is required by the manufacturer.
Two Stage Fuel Delivery
Permanent Capacitor Split Motor
Interrupted-Duty Ignition
Beckett CleanCut Oil Pump
Modine Installation
General Information:
- Product Category: Unit Heater
- Fuel Type: Oil
- Vent Type: Chimney
- Installation Type: Suspended
Performance:
- BTU Heating: 119,000
- Maximum BTU Input: 119,000
- Maximum Air Flow: 1890 CFM
Electrical Data:
- Voltage: 115V
- Electrical Phases: 1
- Frequency: 60 Hz
Dimensions:
- Pipe Inside Diameter: 8″
- Height: 35-1/4″
- Width: 27-1/2″
- Depth: 38-1/8″
- Product Weight: 324 lbs
Product Assurance:
- Certifications: UL
- Made in America
- Warranty: 2 Year Parts
Dimensions and Measurements
| CFM | 1890 |
| Depth | 38.125 in. |
| Height | 35.25 in. |
| Nominal Depth | 39 in. |
| Nominal Height | 36 in. |
| Nominal Width | 28 in. |
| Pipe Inside Diameter | 8 in. |
| Product Weight | 324 lbs. |
| Width | 27.5 in. |
Characteristics and Features
| Airflow Orientation | Horizontal |
| Heat Exchanger Material | Aluminized Steel |
| Installation Type | Suspended |
| Vent Type | Chimney |


Reviews
There are no reviews yet.